Cleaning of Canisters
Canister gun and hose cleaning assembly
Product Information:
The Tuskbond canister gun and hose cleaning assembly has been specially designed by Tuskbond to simplify the process of cleaning out products from canister hoses and guns after use, to prevent blockage occurring in the hose.
The assembly is easy to apply and use and can be left on the canisters in between uses, if required, providing the assembly tap is in the off position before you turn on the canister valve (see step 3. in the directions for use).
Safety:
Please ensure that all connections are tightened to prevent any leakage.
MSDS for Tuskbond Solvent Cleaner aerosol 500ml is available on request.
Directions For Use:
BEFORE ATTACHING THE ASSEMBLY ENSURE THE MAIN VALVE / TAP OF THE CANISTER IS TURNED OFF
1. Attach the assembly to the tap on the canister as shown, ensuring the nut on the assembly is tightly applied and the rest of the assembly is pointing upright whilst tightening.
2. Attach the canister hose to the front adaptor on the assembly tightly, as shown, again ensuring the rest of the assembly is pointing upright whilst tightening.
3. Apply a Tuskbond Solvent Cleaner 500ml aerosol to the assembly by screwing the adaptor ring on the aerosol into the red adaptor on the assembly. N.B. Check the red tap on the assembly is in the horizontal (off) position before applying the Solvent Cleaner aerosol as shown.
4. Turn the red tap on the assembly to the on (Vertical) position to release the Solvent Cleaner into the hose.
5. Apply pressure to the trigger on the gun to push the Solvent Cleaner through the hose and gun, until the solvent starts to push the product through. Aim the gun into a waste container. Keep pressure on the trigger until you are satisfied the hose and gun are thoroughly clean.